This scraper set is designed for you to make your Christmas Tree soap as detailed or simple as you want. 
NOTE - the scraper will be made to fit the full width of your mould if possible, see the soap in the 1st picture. If your mould is wide, rather than tall and skinny the tree will be widened as much as possible to still give a pleasing shape, but you may end up with more background than with a tall and skinny mould.
 
If you are just after a simple design, the single tier set will create a lovely tree with just 2 scrapers, allowing you to pour the Christmas tree in one pour.
 
If you want more detail, you can choose from the 3 tier or 5 tier sets and choose to add decorations and/or presents which can be made with the extruder discs. You will be asked to choose your extruder disc size when making your selection.
Please note, if you already own the 'wrapped present' extruder discs there is no need to buy them again as those are the discs used for the presents in these designs.
 
Please choose your scraper set from the drop down section.
 
To make scraping your soap easier why not add a scraper guide, for details see here. If you are adding a scraper guide, please note that you only need 1 guide, it can be transferred to all of your I Dream In Soap scrapers
 
Custom measurements - READ CAREFULLY PLEASE
Each scraper is made to fit your soap mould (loaf moulds only maximum width 90mm). Please measure the INTERNAL dimensions of your mould carefully and fill in the sections below. Measurements in centimetres/millimetres are preferred for accuracy. If you do not fill your soap mould to the top when making your soap please also add the height that you pour your soap, if this information is not included I will presume that you fill your soap mould to the top and make the scrapers to this size. So for example in the Mould height field below you might add something like - Mould height 11.5cm, soap poured to 10cm.
I Dream in Soap cannot be held responsible for incorrect measurements.  
 
There is a special postage rate available when buying scrapers and/or extruder discs only, as they can be sent 'large letter' size. Please select this option at the checkout. This postage option cannot be used if your order contains anything other than scrapers and extruder discs.
 
These scrapers will last you for many uses and help you create many beautiful soaps as long as you take care of them.
After use, wipe with a cloth to remove excess soap batter.
Wash with warm soapy water, rinse and dry.
Your scrapers are made from PLA, which is a temperature-sensitive thermoplastic polymer derived from renewable resources such as corn starch or sugar cane. PLA will start to deform and melt at around 60°C (140°F), please ensure your washing water is below this temperature and never put your scrapers in the dishwasher.