This extruder disc set contains three discs:
Bonfire sticks
Flame outers
Flame inner
 
To make the Bonfire, extrude brown soap dough from the bonfire stick extruder, red from the large flame and yellow or orange from the small flame. The small fame is shaped to fit inside the large flame, a brush of distilled water will ensure adhesion. Brush a small amount of distilled water onto one of the sides them join together.  Ideally, leave for a few hours to give a good join.
 
The extruder discs can be used to make long embeds to go inside your soap, or small embeds to decorate the top of your soap. They are only suitable for use with soap dough, not suitable for melt and pour soap.
 
The discs are  18mm wide and fit Makins extruders and many of the ones sold on Amazon, please check your disc size before ordering (if you need a different size, just let me know)
 
There is a special postage rate available when buying scrapers and/or extruder discs only, as they can be sent 'large letter' size. Please select this option at the checkout. This postage option cannot be used if your order contains anything other than scrapers and extruder discs.
 
The discs are made from PLA, therefore they are thicker than the metal discs (3mm thick) but very strong.
 
These extruder discs will last you for many uses and help you create many beautiful soaps as long as you take care of them.

After use, wipe with a cloth to remove excess soap batter.
Wash with warm soapy water, rinse and dry.
Your scrapers are made from PLA which is a temperature-sensitive thermoplastic polymer  derived from renewable resources such as corn starch or sugar cane. PLA will start to deform and melt at around 60°C (140°F), please ensure your washing water is below this temperature
and never put your extruder discs in the dishwasher