Tall and skinny moulds (see below for 'wide' moulds)
This soap scraper set will allow you to sculpt a 'Practical Unicorn soap.' Unicorn soaps historically are impractical to ship and use because of the many parts that stick out of the soap. Now you can incorporate the unicorn design fully within a bar of soap.
If you want to create the unicorn eyelashes that go all the way through the soap, don't forget to add the Unicorn Eyelash extruder kit to your basket, you'll find these in the 18mm, 23mm and 24mm extruder disc ranges.
Wide Moulds
This soap scraper set is designed for tall and skinny moulds i.e. where the mould is taller than it is wide. If you have a wide mould please see the 2nd picture which shows how the design will look, the design will mainly show the ears and horn and there may not be room to add eyes. If you are ordering for a wide mould please make sure you are happy with the 'wide mould' picture above.
To make scraping your soap easier why not add a scraper guide, for details see here
The scraper will be made to measure, to ensure you get the best shape for your soaps.
The scraper set is designed in two parts so you can use the ears separately to make other animal soaps.
If you would like to see how the whole soap is made then just go to my YouTube channel 'I Dream In Soap' where you will see a full video showing the process.
Custom measurements - READ CAREFULLY PLEASE
Each scraper is made to fit your soap mould (loaf moulds only maximum width 90mm). Please measure the INTERNAL dimensions of your mould carefully and fill in the sections below. Measurements in centimetres/millimetres are preferred for accuracy. If you do not fill your soap mould to the top when making your soap please also add the height that you pour your soap, if this information is not included I will presume that you fill your soap mould to the top and make the scrapers to this size. So for example in the Mould height field below you might add something like - Mould height 11.5cm, soap poured to 10cm.
I Dream in Soap cannot be held responsible for incorrect measurements.
There is a special postage rate available when buying scrapers and/or extruder discs only, as they can be sent 'large letter' size. Please select this option at the checkout. This postage option cannot be used if your order contains anything other than scrapers and extruder discs.
These scrapers will last you for many uses and help you create many beautiful soaps as long as you take care of them.
After use, wipe with a cloth to remove excess soap batter.
Wash with warm soapy water, rinse and dry.Your scrapers are made from PLA, which is a temperature-sensitive thermoplastic polymer derived from renewable resources such as corn starch or sugar cane. PLA will start to deform and melt at around 60°C (140°F), please ensure your washing water is below this temperature and never put your scrapers in the dishwasher.
